Type a number of gigabytes and read the result in terabytes straight away. A terabyte is 1,024 gigabytes in the binary system, so the converter divides your value by 1,024. Use Swap order to convert terabytes to gigabytes instead.

The gigabyte and the terabyte are neighbouring units of data size: 1 TB is 1,024 GB. Drive, NAS and backup capacities are given in gigabytes or terabytes, so you convert GB to TB when you want to compare a 1,000 GB drive with an offer quoted in terabytes.
The relationship is fixed: 1 TB is 1,024 GB in the binary system, which operating systems and this converter use. To turn gigabytes into terabytes, divide their number by 1,024. The converter does this the moment you type a value.
Watch out for round values. A "1,000 GB" drive is not a full terabyte but about 0.98 TB, because a full terabyte has 1,024 GB. You reach exactly 1 TB from 1,024 GB. It is the same effect as with 1,000 versus 1,024 at lower levels.
This tool computes both standards: binary (1,024) by default, and the Unit standard button switches it to decimal (1,000). Windows and RAM count in binary, while drive makers, macOS and search engines count in decimal — which is why the same capacity is quoted two different ways.
The conversion rests on a fixed relationship: one terabyte is 1,024 gigabytes. To turn gigabytes into terabytes, divide their number by 1,024.
Full formula: terabytes = gigabytes ÷ 1,024. The other way: gigabytes = terabytes × 1,024.
Example: an array is 2,048 GB. Calculation: 2,048 ÷ 1,024 = 2 TB. Likewise 4,096 GB is 4 TB — whole terabytes come from multiples of 1,024.
Mind the round values. 1,000 GB is about 0.98 TB, not 1 TB — you reach exactly 1 TB from 1,024 GB. The multiplier 1,024 comes from the fact that computers count in binary, and two to the power of ten is exactly 1,024.
In Excel, type the formula =A1/1024 in a cell, where A1 holds the value in GB. The other way, terabytes to gigabytes, use =A1*1024.
The table below converts common gigabyte values into terabytes in the binary system (÷1,024). Values that are not a multiple of 1,024 are shown rounded. To convert another value, use the converter above.
| Gigabytes | Terabytes |
|---|---|
| 100 GB | 0.10 TB |
| 500 GB | 0.49 TB |
| 1,000 GB | 0.98 TB |
| 1,024 GB | 1 TB |
| Gigabytes | Terabytes |
|---|---|
| 2,000 GB | 1.95 TB |
| 2,048 GB | 2 TB |
| 4,096 GB | 4 TB |
| 5,000 GB | 4.88 TB |
| Gigabytes | Terabytes |
|---|---|
| 8,192 GB | 8 TB |
| 10,240 GB | 10 TB |
Example: 1,024 GB ÷ 1,024 = 1 TB, while 1,000 GB is only 0.98 TB. Want to convert terabytes to gigabytes? Click Swap order in the converter above.
Every data size unit grows by the same multiplier: each one is 1,024 times larger than the previous. The table below shows the order from byte to petabyte, with a typical example of what each unit describes.
| Unit | Relationship | Typical example |
|---|---|---|
| Byte (B) | base unit | one character of text |
| Kilobyte (KB) | 1,024 B | a short email or icon |
| Megabyte (MB) | 1,024 KB | a photo or an MP3 song |
| Gigabyte (GB) | 1,024 MB | a movie or a RAM stick |
| Terabyte (TB) | 1,024 GB | a hard drive |
| Petabyte (PB) | 1,024 TB | a large data centre |
Order from smallest to largest: byte, kilobyte, megabyte, gigabyte, terabyte, petabyte. Each step is a multiplication by 1,024.
You convert gigabytes to terabytes mostly for large capacities.
1 TB is 1,024 GB in the binary system, which this converter and operating systems use. In the decimal system (SI), used by drive makers among others, 1 TB is 1,000 GB.
Not quite. In the binary system 1,000 GB is about 0.98 TB, because a full terabyte has 1,024 GB. You reach exactly 1 TB from 1,024 GB. Rounding to 1 TB applies only in the decimal system that drive makers use.
1,024 GB is exactly 1 TB, and 2,048 GB is 2 TB. Both come out whole because they are multiples of 1,024, the number of gigabytes in one terabyte.
Divide the number of gigabytes by 1,024. For example, 4,096 GB ÷ 1,024 = 4 TB. The converter does this the moment you type a value, with no button to click.
500 GB is about 0.49 TB, and 2,000 GB is about 1.95 TB. The values do not come out round because a full terabyte has 1,024 GB, not 1,000 GB.
Multiply the number of terabytes by 1,024. For example, 2 TB × 1,024 = 2,048 GB. Click Swap order to have the converter work in this direction.
It depends on the system. Operating systems and this converter use the binary system, where 1 TB is 1,024 GB. Drive makers use the decimal system, where 1 TB is 1,000 GB. That is why a "1 TB" drive shows less capacity in the operating system.
Type the formula =A1/1024 in a cell, where A1 holds the value in gigabytes. The other way, terabytes to gigabytes, use =A1*1024. The same formula works in Google Sheets.
From smallest: byte (B), kilobyte (KB), megabyte (MB), gigabyte (GB), terabyte (TB), petabyte (PB). Each unit is 1,024 times larger than the previous one. A byte describes a single character, while a terabyte describes a drive capacity.

If you have spotted an error in the table or have an idea to improve the converter, write to us. We reply to every message.